Totally switch to a terminal first like you suggested and see if you can work your way from there. My suggestion goes after yours. Always try to fix the running system first.
It’s probably wise to check man pages and other introductory documentation for most system administration tasks. Even though they’re super low-level, they are in my opinion better to send than just pulling the power plug.
Even with a frozen system you can often still ensure data is written to inspect on the next boot. You may have a key labeled SysRq which likely needs an Alt modifier to trigger.
Alt+Shift+SysRq+s to sync data to disk. Alt+Shift+SysRq+u to unmount the disks. Alt+Shift+SysRq+b to reboot the system.
Execute them in that order.
This can help ensure the data about the mishap is written to disk so it can be inspected after the forced reboot. I also check the logs in /var/log but I suppose all of those are in journalctl too these days.
Oh you will suffer in the best way possible. You like the Slimbook now but in five years something will degrade, like the battery. You’ll think about getting a new one and you’ll look forward to it but nooo, you will not get a new one. You will look online and there will be parts available and you’ll repair it. Then you’ll need more disk space or ram so you’re hoping to get a new one but nooo, you will upgrade it. And then something will break and you finally see the part is not in stock so you mail them just in case but instead of an automated reply you’ll get a real response and they’ll get you the part you need. Sure, replacing a glued keyboard is a bit exciting but turns out a lot can be replaced. Not sure how old mine is but I like it, it just keeps running.
The camera is heated so that should not be the biggest problem. I don’t think they have the software to make it work.
I have not had obstacle detection work on the other modules aside from a person being nearby being detected. With that feature you will not see it working from close by, but it will destroy children’s toys, drive over poop, destroy its own antennas by driving under tables, drive against tractors, …
It could be capable one day but not with this software (team).
This company overpromises and underdelivers as if it’s a Chinese competition to do so.
Source: own the lawn mower and blower
Really depends on what is considered nice about MacOS. Just had a new on-boarding with someone who really liked their Mac keybindings and it seems getting those dialed in is nicer (easier? better?) on KDE. I’d also generally gravitate towards Gnome for Mac users though.
As a piece of advice for OP: Accept the use of keybindings over the touchpad. Mac has done a great job and I have not seen a Linux laptop/distro combination that nails it. Search for the pain-points after switching and ask about it (kindly) on a community like this.
FreeCAD’s Arch/BIM workbench
Draw in 2D to create 3D walls. Position windows, doors and others in 3D. Some features like the roof or stairs have their own modules.
You can always fall back to one of the other many workbenches should you need something not part of a typical home (weird stairs, a detailed cupboard, …).
I could not find documentation easily in the past but it likely exists. For a video introduction the FCBLounge channel (YouTube) provides great visual tutorials.
I’ve documented part of our home in this to ideate remodeling. It can be used for pipework but I did not try that yet.
Having experimented with this a lot, I’d say it depends :P
Keyboard only you can get by with 5fps or so, but there’s no real feedback at that point.
15fps is ok and quite usable. Artifacts are the more annoying thing at that rate. 30fps is really more then necessary (though I agree higher is nice on lcd displays).
What bothered me most is the limited contrast, pixel density and limited amount of colors on color eink display.
Lexend Deca from https://www.lexend.com/ because it’s the only font I could find which was studied during it’s creation for being more readable for many people.
Framework makes it their point but also charges for it. Some big make laptops also allow to upgrade parts.
But lets not forget Linux specific laptops. They generally allow upgrading ram and storage. Slimbook even sold me a newer (but also new) keyboard when mine gave up after 5 years or so. Most parts seem to be available still.
Some brands to look for in this group are Tuxedo, bto, slimbook, starbook. Clevo might work too.
It’s the same for my old QQS-pro though. Even after some mods, it still just works. Upgrades are clear but not necessary.
I have not had many issues in the past 15 or more years myself running Linux exclusively aside from a shorter Macbook period. Perhaps I have just been lucky.
We sported (in guessed cronological order of first buy): Dell, HP, Lenovo, Slimbook, Tuxedo, Starlabs, BTO all running Linux at our company. We have not had big issues with any except for keyboard on a Dell, Tuxedo, Slimbook and cooling on a Lenovo. Since I chose the Slimbook many have followed on the path of smaller suppliers and I think we rarely buy from the big makes now.
I have been very happy with slimbook. I came from a macbook (bad idea) with the bad butterfly keyboard and the slimbook was a big upgrade on that front. It’s still not the greatest keyboard for some but I do like it. I have been wanting to buy a new one but whenever something broke or was insufficient I could either upgrade (2 x nvmeSSD slots and RAM can be replaced) or they still supplied spare parts when I sent them an email (keyboard replacement after 4 years). I wanted a framework but Slimbook has offered me spare parts as needed for longerbtham could buy a framework and the slimbook still works well. Plus it’s less expensive. Replacement of the keyboard was not toolless requiring glue to be heated but I did manage to quickly do it with a sleepy head at night. I’d buy their new 13" if this one would be out of service. I’d buy one now but it feels such a waste.
Things I did not like 6 years ago: webcam and microphone of lesser quality, display nice and matte with good color rendition but lower resolution than I’d prefer, no USBC charging on USBC port. Display and USBC are resolved on the new models, no clue about webcam and microphone.
Not CoreXY but you may want to check out FLSun’s delta offerings too.
I have an older one and it has served me well. I bought a QQS pro (I think) for tinkering. It worked well out of the box but I could not resist changing the stepper drivers, installing Klipper, changing the hotend, … It still works well, just faster.
Looking at the few reviews of what they have today I’d buy again but would try not to swap out parts. That or the Prusa you’re looking at.
Agree. They’ll surely to pay the cost and they have a proven track record on handling any potential lock in.
The Docker runtime is probably ok as it is a tool instead of a community. The registry has a community aspect and is where we’ll likely see exploitation of vendor lock in. Luckily Docker was grounded well and you can set up your own registry.
Answer: they’re holding up just fine
deleted by creator
FP5 using e/OS here showing the same artifacts.
I run e/OS on a FP5. I ran e/OS on a Essential PH-1 before and going back to a phone with Google installed just didn’t sit right with me. I did not feel like I could trust the device even after trying to toggle as much of the creepy spying off. As if there’s still someone probably looking over your shoulder because you configured something wrong.
It is not perfect, but it is easy to use and full-featured. All regular apps feel great and battery life is good. I still use specific Google services (such as the calendar for work) but no specific Google apps. I guess Maps is the biggest challenge now but alternatives are good enough to get around with.
You can run Android apps. Not sure about payed Android apps. I try to install FOSS apps through the integrated f-droid store if they’re available there. Installing app store apps sometimes fails because Google blocked the installer. I could install everything so far when needed (including banking apps and specific apps for the vacuum cleaner and such). Sometimes the Android app store apps don’t update for a while and I don’t notice.
I don’t use Murena’s services but self-host Nextcloud. Based on the information they send I think they’re doing a great job for their size.
I flashed the FP5 myself with a beta of e/OS when it was just out because the other phone was broken and (again) I did not feel right with the spying demon in my pocket with native Android. You could flash your device too.
It’s comfortable on this side. If you have further specific questions, shoot.
Concept of the bag on the left, bag on the right.
I’d also like more pictures of the bag. 😁