How do you get the cheap shit here again?

Error persists on entire layer where a new retraction pattern is used, therefore it is very unlikely to be filament humidity or a gcode issue, but filament settings.

What is your retraction length and speed? Do a cold pull to rule out debris. Reduce your retraction until stringing occures, observe if the error repeats. Temperature could be playing a role, but if your layer adhesion is up to expectations, I wouldn’t change. Also observe your nozzle and make sure it’s taught, I’ve been surprised how fast some of my brass nozzles have worn out even with non-abrasives, and causes a similar symptom of randomhish failures, especially if loose.

PS: sometimes a couple cold pulls are needed and try to hit different temps when you pull. I’ve noticed since PETG doesnt stick to PLA, to use PLA as a cold pull you actually need it warm enough that the PETG bits will flake off the inside

Love me some quick swaps, I’ll probably be checking one out eventually. I like Prusa’s mozzle design, but they’re flippin expensive for hardened, and torquing the adapter to a standard mozzle has been a certified PITA

Is the nozzle change proceedure as intensive as I hear? I’ve got a prusa mini and xl, as well as some modded ender 5 and 3, but I’m brand agnostic in expanding my fleet

I sometimes feel like I toe the line in conversation of being anti-medication but that is not my intention ever.

However, with testament of my mother who has worked at a number of hospitals, there are shit doctors. She keeps a list of doctors she’s assisted that she would never want to be worked on by, and that’s really freaky to me. Its a slippery slope to think you know better than doctors as a whole… but with some doctors you just may, and it really may save you a lot of suffering.

Mfers put me on gabapentin for my then undiagnosed scoliosis, the plan was to ramp me up to “hopefully” null my pain. I went into a irrational panic that I had rabies, among other things, and certainly shouldn’t drive when my eyes wouldn’t stay still. I got myself into physical therapy and that turned out to be all I needed.

In a way, isn’t this just saying windows 11 is not ready as a replacement? Because fuck me my work laptop drives me nutty, IT hasn’t locked down all the popups and I can’t fix it withut IT…

Dont mean to pry, but I’ll gladly do whatever you’re doing

Ive had PETG sitting in my 40% humidity basement with no issues, I think thats a partial clog from retraction. If you have a direct drive try 1-2mm of retract, 3-4 for bowden. This will ooze more, but that’s the tradeoff

He made Blastar, an original copy of Space invaders

So lets all give up. Got it

You see here, I mean to enjoy the outdoors and maybe try to make an insignificant difference while you still have breath to whine with. That said, I agree with you, we fucked up, but should death be a reason to stop living?

You come off that you’ve just learned of the world beyond and maybe on the younger side: don’t waste your time online, it is precious.

Also if manicured grass is your reason for deserving death then really you may just be damaged

No, actually, you should touch grass. That thread was entertaining though.

Then WHY fight something that would’ve been pennies and now will at least be dimes? As much as I want to believe musk is close to insolvency, I don’t think its quite possible yet. But then why die on these stupid little hills?

Then why have we invented houseboats? It’s clearly the best of both worlds

Just changed it to hunter3, thought it was time I should upgrade security

Check local sales, as much as I hate Facebook, marketplace around me sometimes has some nice steals, like my OG ender 5 for 100$, and that job was selling off their Prusa MK3s to afford MK4s about half off. You never know -_o_-

I own an Ender 3, 5, and a Prusa Mini. The mini is by far my most reliable printer, but both enders have had a lot of work done to them to get them where they are… and not quite click to print yet.

At one of my jobs I maintained some 35 Prusa Mk3s, about a dozen Elegoo’s, and witnessed their graveyard of Anycubics and some other brands. The Prusa’s generally only needed to be unclogged or have their nozzle changed less than once a month, with only a couple failures per week max, the room also was not temperature controlled and they had some… questionable engineering practices.

The elego’s were like pulling teeth, needing glue to keep it adhered, frequent clogs and skips, thermistors needing replacement after under 100 print hours, blobbing would get into the part coolig fans. Small leveling knobs. Prusa’s IMO were designed to be serviceable, but seem to need it way less.

Especially at a business, the premium on Prusa printers over say bambu labs is well worth their customer support. Ive never used a Bambu so I cant necessarily recommended or not, and I do wish I had an MMU on the cheap as you’d get with their mini, but Im most pleased with my Prusa mini

I’ve practically been groveling begging my girlfriend to switch.

Its not that bad just ignore the ads

Yeah I don’t go in replies because it’s always bots

There’s still some things on there

She didn’t really catch onto mastodon, discoverability is the problem imo. May try getting her onto bluesky even though it wouldn’t be my pick. Some people just like whatever they currently have more than change - which maybe not being able to block like EVERY OTHER media platform may be a big enough change.

Not sure how much this is worth, but it seems to me what happens is that a flap squeezes out forward when you’re a little too close, or when the bed isnt adhering well to the material, which can be sometimes improved with some more heat. By habit I always clean with Isopropyl and I notice it less on my textured Prusa bed.