KOReader for books, and Mihon for manga and comics. KOReader is spefically designed for e-ink displays, and Mihon has a setting to flash the display when changing pages to reduce ghosting on e-ink displays.

Have you tried increasing your first layer extrusion width? A wider first layer will squish the filament into the build plate more, which might help. I use a 140% first layer width.

You can leave it.

As long as you ran systemctl daemon-reload, you should be able to try sleeping without needing to reboot.

It might be due to https://github.com/systemd/systemd/issues/33083.

Try disabling user session freezing when sleeping:

sudo systemctl edit systemd-suspend.service

Add the following to the file:

[Service]
Environment="SYSTEMD_SLEEP_FREEZE_USER_SESSIONS=false"

Reload systemd:

sudo systemctl daemon-reload

After that, try sleeping and waking again.

Apparently Framework did try to get AMD to use LPCAMM, but it just didn’t work from a signal integrity standpoint at the kind of speeds they need to run the memory at.

All video codecs are lossy, meaning you will lose some quality. AV1 and H.265 are modern video codecs with the best quality to bitrate ratios, meaning you can get better quality for the same bitrate, or the same quality with a lower bitrate. The downside the these codecs is that they are very complex and computational expensive to do in software. You’ll want to make sure your GPU supports hardware encoding for the codecs you intend to record with. The reason most people will recommend AV1 over H.265 is that AV1 is royalty free. With H.265, companies have to pay a royalty to use H.265. Because of this, most companies (Netflix, YouTube, Facebook, Twitch, etc.) want to use AV1 going forward, meaning in the near future, it will probably be the dominant codec.

Texas does have anti-SLAPP laws passed and they are among the strongest in the nation. Unfortunately, the courts have ruled that they cannot be used in federal courts.