JelleWho

This is how it looks when my layers didn’t bond.

So try and ban 3D printing guns, because that’s too dangerous. But still sell guns at wallmarkt to be bought without background checks? I have the feeling something is a little off here…

50% of the people is more stupid than average

1. Start investing in (green/cheap) power
2. Dynamic contracts (off-peak charging)

Pulling oil from the ground is so much less sustainable, and it will only get more expensive

It doesn’t have a simple “paint” or “paint.net”

Seems to have a valve at the wall, they should turn that down so it doesn’t do this anymore

I personally run an ESP32 with ESPHOME integrated into Home Assistant. So I can also say this is a good way

Best option is a new seperate drive of course.

But besides that I can recommend making a image of the drive ans storing it somewhere. This way you can flash everything back, there would be a ton of applications that would not run if you try and restore the files only.

Last option should be to customly copy files from folders around. This would not guarantee you can restore Windows. But you maybe would be able to restore config at a much lower storage amount

thermoradiative diode sound more like perlier panels than solar panels

Super cool! You need to share it when your done

000000 (if they still not change them at least)

The only reason I have Unifi around. They support local-only. But totally worth if to have your faith in your own hands. I would never have gone with a cloud solution like Ring

Cudos to you! Doing good

Any changes on some information or links to replicate this? Paint.net is currently a berry big reason duo boot into windows

I bough a second hand laptop with windows 11 and it had Copilot pushing down my throat.

It’s now running Fedora just fine. And if I want I can spin up a local AI when I decide that I need it.

Only watch out for condensation, temperature should be fine for well below 0C.

Also the act of printing in such space does not like it to be too cold. Your quality would start to fail. But I have successfully printed at 5C before and your ymnot trying to print there (yet… ) Another note is that your bed/nozzle temps are expected to be withing limits, mine can’t be below 0 to start printing.

Site note: GPT does also not give reliable information. (altough I do agree Grok is worse.)

Ans this is why you need a new persona, to make life cheap enough

We always say “the grass is always greener on the other side”.

Communism things the same about capitalism.

Got to be fair, since the 1.x update it got so much more usable for me